Combi handling Moving the entire Combi This works much the same as for other devices in the rack. Select the Combinator by clicking on the holder and drag to a new position. An outline of the Combinator is shown when you drag, and a red line shows the insert position. All connections are kept. If you press [Shift] when dragging the Combinator will attempt to auto-route to the insert position in the rack according to standard rules. The auto-routing will take into account whether it is an effect Combi or an instrument Combi. If you press [Alt](Win) or [Option](Mac) while dragging, a copy of the Combi is created. No Auto-routing takes place. If you press [Alt](Win) or [Option](Mac) + [Shift] the copied Combi will be auto-routed according to standard rules. Moving devices within a Combi Just as for devices in the rack, an outline of the devices is shown when you drag, and a red line shows the insert position. All connections are kept. If you press [Shift] when dragging, the device(s) will attempt to auto-route to the insert position according to standard rules. Moving devices out of a Combi If you move devices out of a Combi the following applies: The routing is unchanged, and the External Routing indicator is likely to light up. If you press [Shift] when dragging, the device(s) will attempt to auto-route to the rack according to standard rules. Deleting devices in a Combi This works exactly as for devices in the rack. Select the device and then either select “Delete Devices and Tracks” from the Edit menu or context menu, or press [Backspace]. Uncombining devices You can uncombine a whole Combi or selected devices within a Combi in the following way: If you select a Combinator and then select “Uncombine” from the Edit menu, the Combinator device will be removed, and all devices contained in the Combi will be connected as a single device to the rack. The devices previously connected to the To/From Devices connectors will now be connected to the rack in the same way the Combinator device was (via the Combinator output and input). If you uncombine a few selected devices in a Combi these will be removed from the Combi and added to the rack below the Combi. Connections are unchanged, so external routing is likely to happen.
