Connections All input and output connectors are as usual located on the back panel of the Line Mixer. Mixer Channel Connections Each mixer channel features stereo left/right inputs for connecting audio devices. Use the left input when manually connecting a mono signal source. In addition, there is a Control Voltage (CV) input, for voltage controlling channel Pan from other devices. Auxiliary (AUX) Send The Send connectors are used to connect to the inputs of effect devices. To connect the send to a mono-input device, use the Left (Mono) output. When a Send is connected to an effects device, the corresponding AUX Send knob determines the level of the signal sent to the effect device for each channel. The Send Output can be taken Pre or Post channel level by using the switch to the left of the Send connectors. Auxiliary (AUX) Return These are normally connected to the left and right outputs of effect devices. Master Left/Right Outputs • The Master outputs are auto-routed to the input pair of the first available Mix Channel device in the rack. If no Mix Channel device is available, one will be automatically created when you create a Line Mixer device. If used in a Combi, the Master Outs are normally connected to the “From Devices” connectors on the Combinator.
