Connections On the back of the Redrum you will find the following connections: For each drum sound channel: | Connection | Description Audio Outputs There are individual audio outputs for each drum sound channel, allowing you to route a drum sound to a separate channel in the mixer, possibly via insert effects, etc. For mono sounds, use the “Left (Mono)” output (and pan the sound using the Pan control in the mixer). When you use an individual output for a sound, the sound is automatically excluded from the master stereo output. Gate Out This sends out a gate signal when the drum sound is played (from a pattern, via MIDI or by using the Trigger button on the device panel). This lets you use the Redrum as a “trig sequencer”, controlling other devices.The length of the gate signal depends on the Decay/Gate setting for the sound: In Decay mode, a short “trig pulse” is sent out, while in Gate mode, the gate signal will have the same length as the drum note. Gate In Allows you to trigger the sound from another CV/Gate device. All settings apply, just as when playing the drum sound conventionally. Pitch CV In Lets you control the pitch of the drum sound from another CV device. Other | Connection | Description Send Out 1-2 Outputs for the send signals controlled with the S1 and S2 knobs. Stereo Out This is the master stereo output, outputting a mix of all drum sounds (except those for which you use individual outputs).
