The Insert Effects section The Insert Effects section consists of a Distortion effect and a Low Cut and Hi Cut Filter. Distortion The Distortion effect is a transistor type of distortion. Click and drag up/down in the Distortion box to adjust the input gain to the distortion effect. A high value will overdrive the pre-amp and generate more distortion. Range: 0-100%, where “0” is completely dry/off. Low Cut and Hi Cut Filter The Filter features a Low Cut (Highpass) and a Hi Cut (Lowpass) filter. Perfect for removing any rumble (Lo Cut) and/or hiss (Hi Cut), for example. Click and drag up/down in the Low Cut box to set the cutoff frequency for the highpass filter. Alternatively click the left part of the filter curve in the display and drag sideways. Range: 20 Hz to 25 kHz. Click and drag up/down in the Hi Cut box to set the cutoff frequency for the lowpass filter. Alternatively click the right part of the filter curve in the display and drag sideways. Range: 20 Hz to 25 kHz. Note that the Low Cut and Hi Cut cutoff frequencies can also be on opposite sides of each other, which means that the level of the sample could eventually drop to zero with extreme settings.