Modulation inputs and outputs CV Modulation inputs On the back of Pulveriser you will find CV inputs for controlling the following parameters: Squash Use this for dynamically changing the amount of compression in the Squash section. Dirt Use this for dynamically changing the amount of distortion in the Dirt section. Filter Frequency Use this for dynamically changing the Frequency parameter in the Filter section. Tremor Rate Use this for dynamically changing the LFO Rate parameter in the Tremor section. If the LFO is in Sync mode, the rate will jump between the different resolutions according to the CV modulation input signal amount. Volume Use this for dynamically changing the output volume from Pulveriser. Follower Use this for controlling the envelope follower signal from an external source. The internal envelope follower signal is replaced with the CV signal that is inserted here. Note that the Attack and Release controls can still be used to shape the CV input signal. Audio Modulation inputs Note that these modulation inputs accept audio rate signals, which is really cool! Filter Frequency Use this for dynamically changing the Frequency parameter from an external audio signal. The result of this modulation is Filter FM. Volume Use this for dynamically changing the output volume from an external audio signal. The result of this modulation is amplitude modulation (AM) of the Pulveriser output signal. CV Modulation outputs Follower On this output the control signal from the Follower is present. Tremor Here, the LFO CV signal from the Tremor section is present.
